Sunday Funday

Went out for a quick spin on the bike, not to far as I was time limited. On the cycle path down to ripley, there was the normal glut of dog walkers, joggers and families out enjoying the traffic free route for a day out.

Kids where veering all over the path, going different directions from what their parents told them too, randomly stopping. Did this annoy me? Nope. It’s great to see the cycle way being used how it should be, smiles on people’s faces, happy kids trundling along. I’d rather deal with that, than some of the certified nut jobs behind the wheel of two tonnes of potential death.

And too think, the county council want to run a bypass right through the middle of it.

Maintenence Days

My bike has had a fair bit of work done recently.

Replaced the bottom bracket, dismantled front hub replaced bearings, replaced bearings in rear hub and freehub bearings.

The bottom bracket replacement was easier than I expected. Removing the cranks, and the bottom bracket with the aid of a hammer, a good clean and liberal use of anti seize grease saw that go in with little issue.

Front wheel bearings where just as easy. Problem was, I don’t own a bearing press. So after driving out the old bearings, the new bearings where placed into the recess, old bearing on top, and gentle taps with the hammer to seat it correctly.

Then the back bearings in both the freehub and wheels needed doing. In order for that I had to borrow a bearing press from my mechanic.

Yesterday, I planned a ride out to Pateley Bridge, but never actually made it that far. I got out to Menwith Hill Road, and at the end, saw the traffic racing past on High Moor, and chickened out. That traffic was moving way to fast for my liking. Going back the way I had come, however, was a lot of fun.

Screenshot_2015-10-16-14-55-02Some 15% inclines that I had to climb, where hellish fun on the way back, but my god they where hell on the way out. Church Hill, I am not embarrassed to say, I walked most of it. But I do have a heavy cold as well, so that has not helped 🙂

I recently switched to a pair of 23mm tyres, whereas I was running 25mm. The difference was quite noticeable to start with. I felt like there was more rolling resistance. However, I believe the Felt Z85 was actually designed with 23mm in mind, as the 25mm it comes with do not give you a massive amount of clearance on the wheel gap. So I have got rid of that annoying scraping when crud gets gathered in the wheel space. Which is nice.

Squeeze!

On my recent ride, I was heading up Starbeck high street. There are alot of stopgap traffic up there, as the road is being fixed.

I was overtaken by the knaresbough bus, but the driver failed to estimate the distance, and ended up squeezing me to the curb.
But to be fair, we can all make mistakes, and this could of been worse.

In my time of using the roads, and travelling on the Buses, transdev drivers are polite, professional and courteous. So this may of been an underestimated distance, stressing to make time due to the roadworks or just human error.

I’ve contacted transdev about this, and will update when I hear back.